Metric tensor
In the mathematical field of differential geometry, a metric tensor (or simply metric) is an additional structure on a manifold M (such as a surface) that allows defining distances and angles, just as the inner product on a Euclidean space allows defining distances and angles there. More precisely, a metric tensor at a point p of M is a bilinear form defined on the tangent space at p (that is, a bilinear function that maps pairs of tangent vectors to real numbers), and a metric field on M consists of a metric tensor at each point p of M that varies smoothly with p.
A metric tensor g is positivedefinite if g(v, v) > 0 for every nonzero vector v. A manifold equipped with a positivedefinite metric tensor is known as a Riemannian manifold. Such a metric tensor can be thought of as specifying infinitesimal distance on the manifold. On a Riemannian manifold M, the length of a smooth curve between two points p and q can be defined by integration, and the distance between p and q can be defined as the infimum of the lengths of all such curves; this makes M a metric space. Conversely, the metric tensor itself is the derivative of the distance function (taken in a suitable manner).^{[citation needed]}
While the notion of a metric tensor was known in some sense to mathematicians such as Gauss from the early 19th century, it was not until the early 20th century that its properties as a tensor were understood by, in particular, Gregorio RicciCurbastro and Tullio LeviCivita, who first codified the notion of a tensor. The metric tensor is an example of a tensor field.
The components of a metric tensor in a coordinate basis take on the form of a symmetric matrix whose entries transform covariantly under changes to the coordinate system. Thus a metric tensor is a covariant symmetric tensor. From the coordinateindependent point of view, a metric tensor field is defined to be a nondegenerate symmetric bilinear form on each tangent space that varies smoothly from point to point.
Introduction
Carl Friedrich Gauss in his 1827 Disquisitiones generales circa superficies curvas (General investigations of curved surfaces) considered a surface parametrically, with the Cartesian coordinates x, y, and z of points on the surface depending on two auxiliary variables u and v. Thus a parametric surface is (in today's terms) a vectorvalued function
depending on an ordered pair of real variables (u, v), and defined in an open set D in the uvplane. One of the chief aims of Gauss's investigations was to deduce those features of the surface which could be described by a function which would remain unchanged if the surface underwent a transformation in space (such as bending the surface without stretching it), or a change in the particular parametric form of the same geometrical surface.
One natural such invariant quantity is the length of a curve drawn along the surface. Another is the angle between a pair of curves drawn along the surface and meeting at a common point. A third such quantity is the area of a piece of the surface. The study of these invariants of a surface led Gauss to introduce the predecessor of the modern notion of the metric tensor.
The metric tensor is in the description below; E, F, and G in the matrix can contain any number as long as the matrix is positive definite.
Arc length
If the variables u and v are taken to depend on a third variable, t, taking values in an interval [a, b], then r→(u(t), v(t)) will trace out a parametric curve in parametric surface M. The arc length of that curve is given by the integral
where represents the Euclidean norm. Here the chain rule has been applied, and the subscripts denote partial derivatives:
The integrand is the restriction to the curve of the square root of the (quadratic) differential

(1)
where

(2)
The quantity ds in (1) is called the line element, while ds^{2} is called the first fundamental form of M. Intuitively, it represents the principal part of the square of the displacement undergone by r→(u, v) when u is increased by du units, and v is increased by dv units.
Using matrix notation, the first fundamental form becomes
Coordinate transformations
Suppose now that a different parameterization is selected, by allowing u and v to depend on another pair of variables u′ and v′. Then the analog of (2) for the new variables is

(2')
The chain rule relates E′, F′, and G′ to E, F, and G via the matrix equation

(3)
where the superscript T denotes the matrix transpose. The matrix with the coefficients E, F, and G arranged in this way therefore transforms by the Jacobian matrix of the coordinate change
A matrix which transforms in this way is one kind of what is called a tensor. The matrix
with the transformation law (3) is known as the metric tensor of the surface.
Invariance of arclength under coordinate transformations
RicciCurbastro & LeviCivita (1900) first observed the significance of a system of coefficients E, F, and G, that transformed in this way on passing from one system of coordinates to another. The upshot is that the first fundamental form (1) is invariant under changes in the coordinate system, and that this follows exclusively from the transformation properties of E, F, and G. Indeed, by the chain rule,
so that
Length and angle
Another interpretation of the metric tensor, also considered by Gauss, is that it provides a way in which to compute the length of tangent vectors to the surface, as well as the angle between two tangent vectors. In contemporary terms, the metric tensor allows one to compute the dot product(noneuclidean geometry) of tangent vectors in a manner independent of the parametric description of the surface. Any tangent vector at a point of the parametric surface M can be written in the form
for suitable real numbers p_{1} and p_{2}. If two tangent vectors are given:
then using the bilinearity of the dot product,
This is plainly a function of the four variables a_{1}, b_{1}, a_{2}, and b_{2}. It is more profitably viewed, however, as a function that takes a pair of arguments a = [a_{1} a_{2}] and b = [b_{1} b_{2}] which are vectors in the uvplane. That is, put
This is a symmetric function in a and b, meaning that
It is also bilinear, meaning that it is linear in each variable a and b separately. That is,
for any vectors a, a′, b, and b′ in the uv plane, and any real numbers μ and λ.
In particular, the length of a tangent vector a is given by
and the angle θ between two vectors a and b is calculated by
Area
The surface area is another numerical quantity which should depend only on the surface itself, and not on how it is parameterized. If the surface M is parameterized by the function r→(u, v) over the domain D in the uvplane, then the surface area of M is given by the integral
where × denotes the cross product, and the absolute value denotes the length of a vector in Euclidean space. By Lagrange's identity for the cross product, the integral can be written
where det is the determinant.
Definition
Let M be a smooth manifold of dimension n; for instance a surface (in the case n = 2) or hypersurface in the Cartesian space . At each point p ∈ M there is a vector space T_{p}M, called the tangent space, consisting of all tangent vectors to the manifold at the point p. A metric tensor at p is a function g_{p}(X_{p}, Y_{p}) which takes as inputs a pair of tangent vectors X_{p} and Y_{p} at p, and produces as an output a real number (scalar), so that the following conditions are satisfied:
 g_{p} is bilinear. A function of two vector arguments is bilinear if it is linear separately in each argument. Thus if U_{p}, V_{p}, Y_{p} are three tangent vectors at p and a and b are real numbers, then
 g_{p} is symmetric. A function of two vector arguments is symmetric provided that for all vectors X_{p} and Y_{p},
 g_{p} is nondegenerate. A bilinear function is nondegenerate provided that, for every tangent vector X_{p} ≠ 0, the function obtained by holding X_{p} constant and allowing Y_{p} to vary is not identically zero. That is, for every X_{p} ≠ 0 there exists a Y_{p} such that g_{p}(X_{p}, Y_{p}) ≠ 0.
A metric tensor field g on M assigns to each point p of M a metric tensor g_{p} in the tangent space at p in a way that varies smoothly with p. More precisely, given any open subset U of manifold M and any (smooth) vector fields X and Y on U, the real function
Components of the metric
The components of the metric in any basis of vector fields, or frame, f = (X_{1}, ..., X_{n}) are given by

(4)
The n^{2} functions g_{ij}[f] form the entries of an n × n symmetric matrix, G[f]. If
are two vectors at p ∈ U, then the value of the metric applied to v and w is determined by the coefficients (4) by bilinearity:
Denoting the matrix (g_{ij}[f]) by G[f] and arranging the components of the vectors v and w into column vectors v[f] and w[f],
where v[f]^{T} and w[f]^{T} denote the transpose of the vectors v[f] and w[f], respectively. Under a change of basis of the form
for some invertible n × n matrix A = (a_{ij}), the matrix of components of the metric changes by A as well. That is,
or, in terms of the entries of this matrix,
For this reason, the system of quantities g_{ij}[f] is said to transform covariantly with respect to changes in the frame f.
Metric in coordinates
A system of n realvalued functions (x^{1}, ..., x^{n}), giving a local coordinate system on an open set U in M, determines a basis of vector fields on U
The metric g has components relative to this frame given by
Relative to a new system of local coordinates, say
the metric tensor will determine a different matrix of coefficients,
This new system of functions is related to the original g_{ij}(f) by means of the chain rule
so that
Or, in terms of the matrices G[f] = (g_{ij}[f]) and G[f′] = (g_{ij}[f′]),
where Dy denotes the Jacobian matrix of the coordinate change.
Signature of a metric
Associated to any metric tensor is the quadratic form defined in each tangent space by
If q_{m} is positive for all nonzero X_{m}, then the metric is positivedefinite at m. If the metric is positivedefinite at every m ∈ M, then g is called a Riemannian metric. More generally, if the quadratic forms q_{m} have constant signature independent of m, then the signature of g is this signature, and g is called a pseudoRiemannian metric. If M is connected, then the signature of q_{m} does not depend on m.
By Sylvester's law of inertia, a basis of tangent vectors X_{i} can be chosen locally so that the quadratic form diagonalizes in the following manner
for some p between 1 and n. Any two such expressions of q (at the same point m of M) will have the same number p of positive signs. The signature of g is the pair of integers (p, n − p), signifying that there are p positive signs and n − p negative signs in any such expression. Equivalently, the metric has signature (p, n − p) if the matrix g_{ij} of the metric has p positive and n − p negative eigenvalues.
Certain metric signatures which arise frequently in applications are:
 If g has signature (n, 0), then g is a Riemannian metric, and M is called a Riemannian manifold. Otherwise, g is a pseudoRiemannian metric, and M is called a pseudoRiemannian manifold (the term semiRiemannian is also used).
 If M is fourdimensional with signature (1, 3) or (3, 1), then the metric is called Lorentzian. More generally, a metric tensor in dimension n other than 4 of signature (1, n − 1) or (n − 1, 1) is sometimes also called Lorentzian.
 If M is 2ndimensional and g has signature (n, n), then the metric is called ultrahyperbolic.
Inverse metric
Let f = (X_{1}, ..., X_{n}) be a basis of vector fields, and as above let G[f] be the matrix of coefficients
One can consider the inverse matrix G[f]^{−1}, which is identified with the inverse metric (or conjugate or dual metric). The inverse metric satisfies a transformation law when the frame f is changed by a matrix A via

(5)
The inverse metric transforms contravariantly, or with respect to the inverse of the change of basis matrix A. Whereas the metric itself provides a way to measure the length of (or angle between) vector fields, the inverse metric supplies a means of measuring the length of (or angle between) covector fields; that is, fields of linear functionals.
To see this, suppose that α is a covector field. To wit, for each point p, α determines a function α_{p} defined on tangent vectors at p so that the following linearity condition holds for all tangent vectors X_{p} and Y_{p}, and all real numbers a and b:
As p varies, α is assumed to be a smooth function in the sense that
is a smooth function of p for any smooth vector field X.
Any covector field α has components in the basis of vector fields f. These are determined by
Denote the row vector of these components by
Under a change of f by a matrix A, α[f] changes by the rule
That is, the row vector of components α[f] transforms as a covariant vector.
For a pair α and β of covector fields, define the inverse metric applied to these two covectors by

(6)
The resulting definition, although it involves the choice of basis f, does not actually depend on f in an essential way. Indeed, changing basis to fA gives
So that the righthand side of equation (6) is unaffected by changing the basis f to any other basis fA whatsoever. Consequently, the equation may be assigned a meaning independently of the choice of basis. The entries of the matrix G[f] are denoted by g^{ij}, where the indices i and j have been raised to indicate the transformation law (5).
Raising and lowering indices
In a basis of vector fields f = (X_{1}, ..., X_{n}), any smooth tangent vector field X can be written in the form

(7)
for some uniquely determined smooth functions v^{1}, ..., v^{n}. Upon changing the basis f by a nonsingular matrix A, the coefficients v^{i} change in such a way that equation (7) remains true. That is,
Consequently, v[fA] = A^{−1}v[f]. In other words, the components of a vector transform contravariantly (that is, inversely or in the opposite way) under a change of basis by the nonsingular matrix A. The contravariance of the components of v[f] is notationally designated by placing the indices of v^{i}[f] in the upper position.
A frame also allows covectors to be expressed in terms of their components. For the basis of vector fields f = (X_{1}, ..., X_{n}) define the dual basis to be the linear functionals (θ^{1}[f], ..., θ^{n}[f]) such that
That is, θ^{i}[f](X_{j}) = δ_{j}^{i}, the Kronecker delta. Let
Under a change of basis f ↦ fA for a nonsingular matrix A, θ[f] transforms via
Any linear functional α on tangent vectors can be expanded in terms of the dual basis θ

(8)
where a[f] denotes the row vector [ a_{1}[f] ... a_{n}[f] ]. The components a_{i} transform when the basis f is replaced by fA in such a way that equation (8) continues to hold. That is,
whence, because θ[fA] = A^{−1}θ[f], it follows that a[fA] = a[f]A. That is, the components a transform covariantly (by the matrix A rather than its inverse). The covariance of the components of a[f] is notationally designated by placing the indices of a_{i}[f] in the lower position.
Now, the metric tensor gives a means to identify vectors and covectors as follows. Holding X_{p} fixed, the function
of tangent vector Y_{p} defines a linear functional on the tangent space at p. This operation takes a vector X_{p} at a point p and produces a covector g_{p}(X_{p}, −). In a basis of vector fields f, if a vector field X has components v[f], then the components of the covector field g(X, −) in the dual basis are given by the entries of the row vector
Under a change of basis f ↦ fA, the righthand side of this equation transforms via
so that a[fA] = a[f]A: a transforms covariantly. The operation of associating to the (contravariant) components of a vector field v[f] = [ v^{1}[f] v^{2}[f] ... v^{n}[f] ]^{T} the (covariant) components of the covector field a[f] = [ a_{1}[f] a_{2}[f] … a_{n}[f] ], where
is called lowering the index.
To raise the index, one applies the same construction but with the inverse metric instead of the metric. If a[f] = [ a_{1}[f] a_{2}[f] ... a_{n}[f] ] are the components of a covector in the dual basis θ[f], then the column vector

(9)
has components which transform contravariantly:
Consequently, the quantity X = fv[f] does not depend on the choice of basis f in an essential way, and thus defines a vector field on M. The operation (9) associating to the (covariant) components of a covector a[f] the (contravariant) components of a vector v[f] given is called raising the index. In components, (9) is
Induced metric
Let U be an open set in ℝ^{n}, and let φ be a continuously differentiable function from U into the Euclidean space ℝ^{m}, where m > n. The mapping φ is called an immersion if its differential is injective at every point of U. The image of φ is called an immersed submanifold. More specifically, for m = 3, which means that the ambient Euclidean space is ℝ^{3}, the induced metric tensor is called the first fundamental form.
Suppose that φ is an immersion onto the submanifold M ⊂ R^{m}. The usual Euclidean dot product in ℝ^{m} is a metric which, when restricted to vectors tangent to M, gives a means for taking the dot product of these tangent vectors. This is called the induced metric.
Suppose that v is a tangent vector at a point of U, say
where e_{i} are the standard coordinate vectors in ℝ^{n}. When φ is applied to U, the vector v goes over to the vector tangent to M given by
(This is called the pushforward of v along φ.) Given two such vectors, v and w, the induced metric is defined by
It follows from a straightforward calculation that the matrix of the induced metric in the basis of coordinate vector fields e is given by
where Dφ is the Jacobian matrix:
Intrinsic definitions of a metric
The notion of a metric can be defined intrinsically using the language of fiber bundles and vector bundles. In these terms, a metric tensor is a function

(10)
from the fiber product of the tangent bundle of M with itself to R such that the restriction of g to each fiber is a nondegenerate bilinear mapping
The mapping (10) is required to be continuous, and often continuously differentiable, smooth, or real analytic, depending on the case of interest, and whether M can support such a structure.
Metric as a section of a bundle
By the universal property of the tensor product, any bilinear mapping (10) gives rise naturally to a section g_{⊗} of the dual of the tensor product bundle of TM with itself
The section g_{⊗} is defined on simple elements of TM ⊗ TM by
and is defined on arbitrary elements of TM ⊗ TM by extending linearly to linear combinations of simple elements. The original bilinear form g is symmetric if and only if
where
is the braiding map.
Since M is finitedimensional, there is a natural isomorphism
so that g_{⊗} is regarded also as a section of the bundle T*M ⊗ T*M of the cotangent bundle T*M with itself. Since g is symmetric as a bilinear mapping, it follows that g_{⊗} is a symmetric tensor.
Metric in a vector bundle
More generally, one may speak of a metric in a vector bundle. If E is a vector bundle over a manifold M, then a metric is a mapping
from the fiber product of E to R which is bilinear in each fiber:
Using duality as above, a metric is often identified with a section of the tensor product bundle E* ⊗ E*.
Tangent–cotangent isomorphism
The metric tensor gives a natural isomorphism from the tangent bundle to the cotangent bundle, sometimes called the musical isomorphism. This isomorphism is obtained by setting, for each tangent vector X_{p} ∈ T_{p}M,
the linear functional on T_{p}M which sends a tangent vector Y_{p} at p to g_{p}(X_{p},Y_{p}). That is, in terms of the pairing [−, −] between T_{p}M and its dual space T^{∗}
_{p}M,
for all tangent vectors X_{p} and Y_{p}. The mapping S_{g} is a linear transformation from T_{p}M to T^{∗}
_{p}M. It follows from the definition of nondegeneracy that the kernel of S_{g} is reduced to zero, and so by the rank–nullity theorem, S_{g} is a linear isomorphism. Furthermore, S_{g} is a symmetric linear transformation in the sense that
for all tangent vectors X_{p} and Y_{p}.
Conversely, any linear isomorphism S : T_{p}M → T^{∗}
_{p}M defines a nondegenerate bilinear form on T_{p}M by means of
This bilinear form is symmetric if and only if S is symmetric. There is thus a natural onetoone correspondence between symmetric bilinear forms on T_{p}M and symmetric linear isomorphisms of T_{p}M to the dual T^{∗}
_{p}M.
As p varies over M, S_{g} defines a section of the bundle Hom(TM, T*M) of vector bundle isomorphisms of the tangent bundle to the cotangent bundle. This section has the same smoothness as g: it is continuous, differentiable, smooth, or realanalytic according as g. The mapping S_{g}, which associates to every vector field on M a covector field on M gives an abstract formulation of "lowering the index" on a vector field. The inverse of S_{g} is a mapping T*M → TM which, analogously, gives an abstract formulation of "raising the index" on a covector field.
The inverse S^{−1}
_{g} defines a linear mapping
which is nonsingular and symmetric in the sense that
for all covectors α, β. Such a nonsingular symmetric mapping gives rise (by the tensorhom adjunction) to a map
or by the double dual isomorphism to a section of the tensor product
Arclength and the line element
Suppose that g is a Riemannian metric on M. In a local coordinate system x^{i}, i = 1, 2, …, n, the metric tensor appears as a matrix, denoted here by G, whose entries are the components g_{ij} of the metric tensor relative to the coordinate vector fields.
Let γ(t) be a piecewisedifferentiable parametric curve in M, for a ≤ t ≤ b. The arclength of the curve is defined by
In connection with this geometrical application, the quadratic differential form
is called the first fundamental form associated to the metric, while ds is the line element. When ds^{2} is pulled back to the image of a curve in M, it represents the square of the differential with respect to arclength.
For a pseudoRiemannian metric, the length formula above is not always defined, because the term under the square root may become negative. We generally only define the length of a curve when the quantity under the square root is always of one sign or the other. In this case, define
While these formulas use coordinate expressions, they are in fact independent of the coordinates chosen; they depend only on the metric, and the curve along which the formula is integrated.
The energy, variational principles and geodesics
Given a segment of a curve, another frequently defined quantity is the (kinetic) energy of the curve:
This usage comes from physics, specifically, classical mechanics, where the integral E can be seen to directly correspond to the kinetic energy of a point particle moving on the surface of a manifold. Thus, for example, in Jacobi's formulation of Maupertuis' principle, the metric tensor can be seen to correspond to the mass tensor of a moving particle.
In many cases, whenever a calculation calls for the length to be used, a similar calculation using the energy may be done as well. This often leads to simpler formulas by avoiding the need for the squareroot. Thus, for example, the geodesic equations may be obtained by applying variational principles to either the length or the energy. In the latter case, the geodesic equations are seen to arise from the principle of least action: they describe the motion of a "free particle" (a particle feeling no forces) that is confined to move on the manifold, but otherwise moves freely, with constant momentum, within the manifold.
Canonical measure and volume form
In analogy with the case of surfaces, a metric tensor on an ndimensional paracompact manifold M gives rise to a natural way to measure the ndimensional volume of subsets of the manifold. The resulting natural positive Borel measure allows one to develop a theory of integrating functions on the manifold by means of the associated Lebesgue integral.
A measure can be defined, by the Riesz representation theorem, by giving a positive linear functional Λ on the space C_{0}(M) of compactly supported continuous functions on M. More precisely, if M is a manifold with a (pseudo)Riemannian metric tensor g, then there is a unique positive Borel measure μ_{g} such that for any coordinate chart (U, φ),
If M is also oriented, then it is possible to define a natural volume form from the metric tensor. In a positively oriented coordinate system (x^{1}, ..., x^{n}) the volume form is represented as
Examples
Euclidean metric
The most familiar example is that of elementary Euclidean geometry: the twodimensional Euclidean metric tensor. In the usual Cartesian (x, y) coordinates, we can write
The length of a curve reduces to the formula:
The Euclidean metric in some other common coordinate systems can be written as follows.
Polar coordinates (r, θ):
So
In general, in a Cartesian coordinate system x^{i} on a Euclidean space, the partial derivatives ∂ / ∂x^{i} are orthonormal with respect to the Euclidean metric. Thus the metric tensor is the Kronecker delta δ_{ij} in this coordinate system. The metric tensor with respect to arbitrary (possibly curvilinear) coordinates q^{i} is given by
The round metric on a sphere
The unit sphere in ℝ^{3} comes equipped with a natural metric induced from the ambient Euclidean metric, through the process explained in the induced metric section. In standard spherical coordinates (θ, φ), with θ the colatitude, the angle measured from the zaxis, and φ the angle from the xaxis in the xyplane, the metric takes the form
This is usually written in the form
Lorentzian metrics from relativity
In flat Minkowski space (special relativity), with coordinates
the metric is, depending on choice of metric signature,
For a curve with—for example—constant time coordinate, the length formula with this metric reduces to the usual length formula. For a timelike curve, the length formula gives the proper time along the curve.
In this case, the spacetime interval is written as
The Schwarzschild metric describes the spacetime around a spherically symmetric body, such as a planet, or a black hole. With coordinates
we can write the metric as
where G (inside the matrix) is the gravitational constant and M represents the total mass–energy content of the central object.
See also
 Basic introduction to the mathematics of curved spacetime
 Clifford algebra
 Finsler manifold
 List of coordinate charts
 Ricci calculus
 Tissot's indicatrix, a technique to visualize the metric tensor