Rotax

BRP-Rotax GmbH & Co KG
Company typePrivate company
IndustryMechanical engineering
Founded1920
Headquarters,
ProductsInternal combustion engines
OwnerBRP-Powertrain Management GmbH,
BRP Holdings (Austria) GmbH
ParentBombardier Recreational Products
Websitewww.rotax.com

Rotax is the brand name for a range of internal combustion engines developed and manufactured by the Austrian company BRP-Rotax GmbH & Co KG (until 2016 BRP-Powertrain GmbH & Co. KG), in turn owned by the Canadian Bombardier Recreational Products. Under the Rotax brand, the company is one of the world's largest producers of light piston engines.

Rotax four-stroke and advanced two-stroke engines are used in a wide variety of small land, sea and airborne vehicles. Bombardier Recreational Products (BRP) use them in their own range of such vehicles. Since the 1990s, Rotax has been the world's dominant supplier of engines for ultralight aircraft and light sport aircraft, and a major producer of engines for other light aircraft.

History

The company was founded in 1920 in Dresden, Germany, as ROTAX-WERK AG. In 1930, it was taken over by Fichtel & Sachs and transferred its operations to Schweinfurt, Germany. Operations were moved to Wels, Austria in 1943, and finally to Gunskirchen, Austria in 1947. In 1959, the majority of Rotax shares were taken over by the Vienna-based Lohner-Werke, a manufacturer of car and railway wagon bodies.

In 1970, Lohner-Rotax was bought by the Canadian Bombardier Inc. The former Bombardier branch, Bombardier Recreational Products, now an independent company, uses Rotax engines in its ground vehicles, personal water craft, and snowmobiles.

Applications

Snowmobiles

The original application for Rotax engines, Ski-Doo snowmobiles from Bombardier Recreational Products are equipped with Rotax engines, including two-stroke and four-stroke, turbocharged and naturally aspirated, two- and three-cylinder models.

Aircraft

Rotax is one of the world's principal suppliers of aircraft engines for ultralight aircraft, light aircraft and unmanned aerial vehicles. Between 1985 and 1995, 60,000 Rotax engines were sold for aircraft propulsion. In the light aircraft class, in 1998 Rotax outsold all other aero engine manufacturers combined. Their four-stroke engines powered most U.S.-certified light sport aircraft when they first appeared around 2004. Over two decades later, Rotax engines remain the most popular line of engines for light sport and ultralight aircraft, and the second-most-popular (after Lycoming Engines) for U.S. Experimental / Amateur-Built (E/A-B) aircraft.

Two-stroke aircraft engines

Rotax air-cooled, two-stroke engines began appearing on ultralight aircraft in the early 1980s, with a pair of single-cylinder, 9.5-horsepower Rotax 185s powering the single-seat Lazair ultralight by 1982. Soon, the 26-horsepower, single-cylinder Rotax 277 became the most widely used engine powering U.S. ultralight aircraft (and remains, for many, the only Rotax engine they can use to adequately power the aircraft and still remain within the FAA-mandated weight limits for ultralight aircraft which can be operated without a pilot's license).

Two-stroke Rotax model numbers approximated the engine's displacement (in cubic centimeters), and the first two digits (from the 277, on) are very roughly similar to the engine's horsepower (e.g.: The Rotax 447 engine displaces 437 cc, and is rated at 40 hp).

Subsequent evolutions of the early designs included the two-cylinder, two-stroke Rotax 377, Rotax 447, and Rotax 503, all in production by 1985 (the last of these, the 503, was discontinued in 2010-2011, by then the most popular engine it its class, and still widely used as of 2023). Later two-stroke designs included the Rotax 532 (circa 1984) and Rotax 582, both of which augmented the air-cooling with liquid-cooled cylinder heads.

Most Rotax two-stroke engines were rated, recommended, or reported with a TBO (time between overhauls) of about 150-300 hours (compared to 1200-2000 hours for government-certified, conventional, four-stroke, light aircraft engines), though later models improved upon that some.

Four-stroke aircraft engines

Moving towards more demanding aircraft applications, Rotax, by 1989, developed a four-stroke, four-cylinder, engine: the Rotax 912, with versions eventually ranging from 80 to over 100 horsepower, followed by a turbocharged 115 horsepower Rotax 914.

Rotax four-stroke engines differ from conventional four-stroke aircraft engines by their unusually small displacement for the amount of horsepower -- compensated for by higher than normal rotational speed (over 5,000 rpm). To reduce propeller-shaft speeds to normal aircraft propeller rotational speeds, (around 2300-2400 rpm) the engines use a reduction gearbox. They are also designed to accept motor spirit, with up to 10% Ethanol content.

These engines were initially given a 600-hour TBO, less than traditional light aircraft engines. But operational experience and modifications to address specific reliability issues over time gradually extended the TBO to 2,000 hours. An independent 2022 statistical study of U.S. government accident data found that the Rotax 912 family had the lowest rate of failure of the six most common lines of engines used in registered Experimental/Amateur-Built (E/A-B) aircraft.

By 2014, Rotax had produced and sold 50,000 of 912/914 four-stroke engines. Later models increased horsepower, with several variants of the 912 family, and a new 135-horsepower Rotax 915 iS.

The Rotax four-stroke aircraft engine line immediately dominated the emerging category of U.S.-certified "Light Sport Aircraft" (LSAs), powering most of them. One general aviation industry media reporter found that 70-80% of the 66,000 aircraft he'd identified, worldwide, used Rotax four-stroke engines. The 912/914/915 series also powers larger certified aircraft, including the Diamond Katana, and the twin-engined Tecnam P2006T and Leza/Lockwood Aircam.

Motorcycles

The Can-Am division of Bombardier Inc. developed a line of motorcycles starting in 1971, powered by Rotax engines. The Can-Am motorcycle operation was outsourced to Armstrong-CCM Motorcycles in 1983, with production ending in 1987.

Can-Am resumed motorcycle production with a series of on-road three-wheel motorcycles, starting with the Spyder, using Rotax engines. As of 2020, there are three models: the Ryker uses the 2-cylinder 600 ACE and 3-cylinder 900 ACE, the Spyder F3 and the Spyder RT use the 3-cylinder 1330 ACE. 1000 v twin 5sp

In the motorcycle world Rotax are particularly known for their single-cylinder engines of comparatively small to medium displacement. Several major motorbike manufacturers, who are otherwise renowned for their proprietary but bigger engines, use Rotax engines in their smaller models.

But Rotax has developed a 798 ccm parallel twin engine with and for BMW, too, which has been built from 2006 to 2020.

Brands using Rotax engines include:

Personal watercraft

As of 2020, all Sea-Doo brand personal watercraft from Bombardier Recreational Products are equipped with four-stroke, supercharged and normally aspirated, three-cylinder Rotax engines of the ACE (Advanced Combustion Efficiency) series.

Off-road vehicles

Can-Am Off-Road vehicles from Bombardier Recreational Products are equipped with Rotax engines.

Karting

The company introduced the Rotax Max for karting in 1998, and started organizing the Rotax Max Challenge in 2000. It also introduced the Mojo karting tyres in 2006 and the XPS lubricants in 2010.

Products

Aircraft engines

Rotax 912 installation

Rotax engines designed specifically for light aircraft include both four-stroke and two-stroke models.

Current models are:

Certified engines
Model 912 A/F 914 F2/F3/F4 912 S/iSc Sport 915 iSc A/B - 916 iSc3 B
Type Certification 25 September 1989 15 May 1996 27 November 1998 14 December 2017
Configuration 4-stroke, 4 cylinder boxer, spark ignition, liquid cooled heads, ram-air cooled cylinders, dry sump
Aspiration natural turbocharger natural turbocharger+intercooler
Fuel delivery CD carburetors injection, dual channel FADEC
Fuel automotive petrol or AVGAS
Stroke 61 mm / 2.40 in
Bore 79.5 mm / 3.13 in 84 mm / 3.31 in
Displacement 1211 cm3 / 73.9 cu.in 1352 cm3 / 82.5 cu.in
Compression 9:1 10.8:1 8.2:1
Gear ratio 2.27:1 / 2.43:1 2.43:1 2.55:1
Length 590 mm / 23.2 in 665 mm / 26.2 in 596 mm / 23.5 in 657 mm / 25.9 in
Height 375 mm / 14.8 in 531 mm / 20.9 in 398 mm / 15.7 in 398 mm / 15.7 in
Width 576 mm / 22.7 in 578 mm / 22.8 in
Dry Weight 57.1⁠–⁠59.8 kg / 125.88⁠–⁠131.8 lb 71.7⁠–⁠74.4 kg / 158⁠–⁠164 lb 58.3⁠–⁠64.4 kg / 128.52⁠–⁠142 lb 84.6⁠–⁠85.2 kg / 186.4⁠–⁠187.8 lb
Take-off Power 59.6 kW (79.9 hp) 84.5 kW (113.3 hp) 73.5 kW (98.6 hp) 100–117 kW (134–157 hp)
Take-off RPM 5800
Rotax 503

Historical models no longer in production include:

Karting engines

The Rotax MAX engine karting engine is a two-stroke engine series, launched in 1997.

OEM

The company also produces unbranded engines, parts and complete powertrains for Original Equipment Manufacturers (OEM). Uses include motor bikes and scooters, with complete engines including the Rotax 122 and Rotax 804.


This page was last updated at 2024-02-21 06:42 UTC. Update now. View original page.

All our content comes from Wikipedia and under the Creative Commons Attribution-ShareAlike License.


Top

If mathematical, chemical, physical and other formulas are not displayed correctly on this page, please useFirefox or Safari